Mounting mixes

Main page / Production /
Mounting mixes

GOST 31357-2007
VOLMA-Block is a mounting adhesive specially designed for thin-layered mounting of cell concrete blocks at freezing temperatures to prevent cold bridging in butt seam areas. Thus the adhesive preserves the thermal insulation capacity of cell concrete.

GOST 31357-2007
VOLMA-Block MOROZOSTOYKIY is a mounting adhesive specially designed for thin-layered mounting of cell concrete blocks at freezing temperatures to prevent cold bridging in butt seam areas. Thus the adhesive preserves the thermal insulation capacity of cell concrete.
GOST 31357
VOLMA-Dacha is a dry mix based on high-quality cement, natural graded filling agents, and modifying additives.
GOST 31386-2008
VOLMA-List Montazh is a dry mounting mix based on gypsum binder and modified with mineral and chemical additive agents to assure strong adhesion, water-retaining capacity, and optimal service life.
GOST 31386-2008;
VOLMA-Montazh is a dry mounting mix based on gypsum binder and modified with mineral and chemical additives to assure strong adhesion and water-retaining capacity as well as optimal service life.
GOST 31386-2008;
VOLMA-Montazh Moroz is a dry mounting mix based on gypsum binder and special anti-freezing additives that make it possible to mounting partitions of gypsum partition blocks at temperatures of down to - 15°С.
GOST 54359-2011
VOLMA-Termofacade is a dry microfiber-reinforced adhesive cement mix based on Portland cement, graded silica sand, polymer and mineral additives.
Required field
Required field